Honeywell 9900 Manuale Utente

Specifies the symbology identifier sent 
after the decoded/received data.

0

0=No symbology identifier is 

sent.

1=The Code ID is sent.
2=The AIM ID is sent.
3=The SymModifier is sent.

Enables and disables 
• The sound that ScanWedge makes 

when starting up, shutting down, or 
restarting.

• The audio notification when an IrDA 

session is established and closed 
and the serial port is opened and 
closed.

1

0=Disabled 
1=Enabled

This key applies only 
to the IrDA and serial 
ports.

Enable and disables a notification 
message when an IrDA session is 
established and closed and the serial 
port is opened and closed. 

0

0=Disabled
1=Enabled

This key applies only 
to the decoder.

Enables and disables ScanWedge’s 
compatibility with EZConfig Client when 
decoding bar codes. 

1

0=Disabled; ScanWedge 

processes EZConfig 
barcodes as it would any 
other barcode.

1=Enabled; ScanWedge 

recognizes EZConfig 
barcodes and passes them 
on to the EZConfig Client for 
further processing.

The Settings section determines how ScanWedge interprets data from the decoder, serial port, and IrDA 
interface.

0 = Disable    1 = Enable