Nikon 9000ED Manuale Utente

 Insert fi lm

Place fi lm in the holder with the refl ec-
tive fi lm base up (matte emulsion sur-
face down; 

 26) and with the end of 

the fi lm against the stops.

FH-835M Holder for 35-mm Slides
The FH-835M can be used to scan up to fi ve 35-mm slides with mounts 1.0–3.2 mm 
thick.  Slide the mounts into place between the guides, short side fi rst and with the 
refl ective fi lm base up (the matte emulsion surface down; 

 26).  Stop when the slides 

contact the base of the clips.

Insert slides between the guides.  Forcing the slides onto the guides could damage the 
slides or clips and prevent the scanner from focusing correctly.  To minimize resistance, 
try inserting slides at a slight angle.

Be sure a slide is inserted in the fi rst slot.  Leaving the aperture at the left end of the hold-
er uncovered could cause scanning errors or interfere with accurate color reproduction.

Proceed to “Step 3 — Open the Scan Window” (

 30).

Direction of 

insertion

Thumbnails 

displayed in 

order shown

Guides

 Open the holder

Undo the latches and open the 
holder.

FH-869S Holder for Medium-Format Film
The FH-869S can be used to scan medium-format 

(120/220, 2¼ or Brownie)

  fi lm  and 

59 × 82 mm  electron-microscope fi lm.  The length of the fi lm strip that can be inserted in 
the holder depends on the type of fi lm:
• 6 × 4.5:  1–4  frames

• 6 × 6:  1–3  frames

• 6 × 7 – 6 × 9:  1–2  frames

Stops

Direction

of insertion

Thumbnails 

displayed in 

order shown

Arrow

Arrow