Nikon 9000ED Manuale Utente

1 

Check the status LED
Make sure that the status LED is glowing 
steadily.  Do not insert fi lm holders while 
the status LED is blinking.

2 

Find the arrow on the front of the holder
The front each holder is marked with 
an embossed arrow showing the direc-
tion of insertion.  When the holder is 
inserted, the side with the arrow should 
face up with the arrow pointing toward 
the scanner.

The scanner is automatically calibrated at regular intervals if left on with no holder in place.  Calibration 
will end when a holder is inserted.

Arrow

3 

Insert the holder
Keeping the holder straight, slide the it 
into the holder slot with the arrow up 
and facing toward the scanner.  Once 
the holder has been inserted as far as the 
insertion guides, the automatic loading 
mechanism will activate.  Remove your 
hands from the holder when loading 
starts.  When loading stops, the holder 
is in scanning position.

If the loading mechanism is does not ac-
tivate, remove the holder and try again.  
Do not use force.  Once loading has 
begun, do not interfere with the load-
ing mechanism.  Attempting to remove 
the holder during loading or otherwise 
interfering with the mechanism could 
cause scanning errors.

Insertion guide