Nikon 9000ED Manuale Utente

1

  Turn the computer off

Turn the computer off and disconnect all cables.

2

  Insert the IEEE 1394 (Firewire) interface board

Insert the supplied IEEE 1394 (Firewire) 
board as shown.  For information on the 
location of the PCI slots and on install-
ing PCI boards, see the documentation 
provided with the computer and the IEEE 
1394 (Firewire) interface board.

Do not use force.  Excessive force could 
damage the computer or board.

After installing the IEEE 1394 (Firewire) interface board, reconnect the cables and turn the 
computer on.

Windows XP, Windows 2000 Professional
The fi rst time the computer is powered on with the board installed under Windows XP or 
Windows 2000 Professional, Windows will automatically install the necessary drivers.  Con-
fi rm that the drivers have been correctly installed as described on the opposite page.

Windows Me
The fi rst time the computer is powered on with the board installed, the “Add New Hardware 
Wizard” will be displayed.  Select Automatic search for a better driver (Recommended) 
and click Next to install the drivers for the IEEE 1394 interface board.  When installation is 
complete, Windows Me will display message stating that the computer must be restarted be-
fore changes to system settings can take effect.  Click Yes to restart the computer.  Proceed 
to the next step once the computer restarts.