Burris LH 4 Manuale Utente

Refer to the documentation listed below to install the slides in the rack and to 
install the NetServer into the rack: 

•

  To install into an HP rack: Refer to the NetServer's user guide or 

installation guide. For cabling instructions, refer to the documentation that 
came with the rack and either the Rack Cabling Reference for your HP 
NetServer. 

•

  To install into a Compaq Rack: Refer to the HP NetServer LH 3r, LH 4r, 

Racks. For cabling instructions, refer to the documentation that came with 
the rack and either the Rack Cabling Reference for your HP NetServer. 

Refer to this rack documentation for detailed instructions as you do the following: 

 

1.  Extend the anti-tip foot or ensure that the anti-tip feature is installed. Lower 

the leveler feet. 

   

To prevent the rack enclosure from tipping over, 

 

•

  Extend the anti-tip foot or verify that the anti-tip feature is 

installed. 

 

•

  Verify that the leveler feet are lowered. 

 

•

  DO NOT extend more than one piece of equipment at a 

time out from the front of the rack. 

 

Failure to take these precautions could result in serious injury 
and equipment damage. 

 

2.  If there is a door on the rack, remove it.