Lathem 7500E Manuale Utente

15

The unit can be used on a table-top or mounted on a wall.  When choosing a location, please 
note locations to avoid in "Environmental Conditions" at the bottom of the page.  If you are 
using  the  unit  as  a  table-top,  find  an  appropriate  place  and  skip  to  Step  3.    If  using  as  a 
wall-mount, take the following steps. 

The unit can be mounted on a wall using the supplied mounting fittings.

The supplied screws are intended 
for  use  on  a  thick  wooden  wall 
or  wooden  column.    Do  not  use 
them  on  any  other  materials.
There  is  a  danger  that  the  unit 
may  come  off  if  used  on  other 
materials.

Install  wall  mount  screws  (supplied) 
into a wall 3 15/16" (10 cm) apart.
Be  sure  to  keep  about  1/8" ( 3mm) 
of the screw head out of the wall.
Use template on bottom of page 10
if you prefer.

Avoid placing the unit in environments that are:
• humid or dusty
• exposed to direct sunshine
• subject to frequent or continuous vibrations
• outside the temperature range between 23˚F (-5˚C) and 113˚F (45˚C)
• affected by chemicals or ozone

3 15/16" (1

0cm)

1/8"

(3mm)

Mount  the  wall  mount  fittings 
as shown on the right.

Plug the unit into power, and 
the unit is ready to use.

Note:

The unit has an internal battery that will save the settings when unplugged.