Sony 8000SF Manuale Utente

74

DME Wipes

   

Cha

Picture-in-picture: The one-channel mode and two-channel mode differ as 

follows.
In one-channel mode, this completes in two transitions. In the first 
transition, the old video shrinks, and the new video appears behind it.
In the second transition, the old video expands again until it is its original 
size.
(Pattern number: 1251 (one-channel mode))
In two-channel mode, in the first half of the transition, the old video 
shrinks, and the new video appears. In the second half of the transition, the 
new video expands, and the old video disappears. You can move the 
pattern from the current position by a relative amount. During the 
transition, the signal from the utility 2 bus of the M/E bank appears as the 
background.
(Pattern numbers: 2651 and 2652 (two-channel mode))

2D trans: The new video appears over the old video, while undergoing 

expansion, two-dimensional rotation and translation.
(Pattern numbers: 1051 to 1058, 1061 to 1064, 1068 (one-channel mode))

3D trans: In one-channel mode, the new video appears over the old video, 

while undergoing expansion, three-dimensional rotation and translation.
(Pattern numbers: 1071, 1072, 1074, 1076, 1077, 1088, 1091 to 1094 (one-
channel mode))
In two-channel mode, the old video changes to the new video while both 
undergo expansion, three-dimensional rotation and translation.
(Pattern numbers: 2631 to 2634, 2642, 2644 (two-channel mode))

Sparkle: The new video appears over the old video with a nonlinear effect 

applied, such as broken glass, explosion, or melt. Next this returns to the 
original video as the effect gradually reduces.
(Pattern numbers: 1391, 1393, 1394, 1396, 1398, 1399 (one-channel 
mode))

Split slide: The new video appears in strip form while sliding interleaved in the 

opposite direction over the old video.
(Pattern numbers: 1384 to 1389 (one-channel mode))

Mosaic: In the first half of the transition, a mosaic is gradually applied to the 

old video, then at the 50% point the inner image changes to the new video. 
In the second half, the mosaic effect on the new video is gradually reduced, 
returning to the original image at 100%.
(Pattern number: 1701 (one-channel mode))

Defocus: In the first half of the transition, the old video is gradually defocused, 

then at the 50% point the inner image changes to the new video. In the 
second half, the defocusing effect on the new video is gradually reduced, 
returning to the original image at 100%.
(Pattern number: 1702 (one-channel mode))

Brick: In two-channel mode, a brick such that the side surface is visible slides 

in over the old video, then rotates so that the new video can be seen.
(Pattern numbers: 2801 to 2804, 2811 to 2814 (two-channel mode))