Rose electronic 2xE Manuale Utente

 

16.  Pre-configure the CPU port, if needed, as outlined in steps 4a-f on 

page 12 if the computer being connected does not use a PC2 
type keyboard or PS/2 mouse (defaults). Pre-configure the CPU 
port before connecting the computer. If the computer uses a PC2 
type keyboard and PS/2 mouse, connect it to the corresponding 
CPU port.  No pre-configuration is needed. 

17.  Boot the computer if power is not applied. You should see the 

boot up sequence on the KVM monitor. If the computer was 
connected to a pre-configured CPU port with power applied, you 
should see that computers video. 

18.  Verify that the keyboard, video, and mouse on the connected 

computer function properly before proceeding.   

19.  Switch the KVM station to the next sequential CPU port as 

explained in step 15 and perform steps 16 – 18 for the remaining 
computers. 

20.  Connect other KVM stations as needed to the UltraMatrix switch 

and verify they operate properly. (See Appendix F. for proper 
KVM station placement) 

 
Other configuration parameters can be set-up for the system, 
computers, KVM stations, users, profiles, groups, and languages.  See 
the “Configuration menu” section for instructions on setting up these 
items.  
 
Please refer to the Operations section for using the UltraMatrix switch 
and Appendix F for KVM placement and usage. 
 
A variety of cable configurations can be designed to accomplish the 
switching needs for your system.  If you need assistance in designing 
your system layout, contact our technical staff.