DELL N3000 Manuale Utente

Configuring Differentiated Services

This section provides information about the commands you use to configure 

DiffServ settings on the switch. For more information about the commands, 

see the 

Dell Networking N2000, N3000, and N4000 Series Switches CLI 

Reference Guide at 

.

Beginning in Privileged Exec mode, use the following commands in to 

configure the global DiffServ mode and view related settings.

Beginning in Privileged Exec mode, use the following commands to configure 

DiffServ classes for IPv4 and view related information.

Enter global configuration mode.

Set the DiffServ operational mode to active.

Exit to Privileged EXEC mode.

Display the DiffServ general information, which 

includes the current administrative mode setting as 

well as the current and maximum number of 

DiffServ components.

Enter global configuration mode.

class-map match-all 

class-map-

name

Define a new DiffServ class and enter Class-Map 

Configuration mode for the specified class.

To enter Class-Map Configuration mode for a 

class that has already been created, use the class-

map 

class-map-name

 command. 

Configure a match condition for all the packets.

Add to the specified class definition the set of 

match conditions defined for another class.