Q-Logic 5802V Manuale Utente

10 – RADIUS Server Configuration

Configuring a RADIUS Server on the Switch

59263-01  A

10-3

A

Enter the 

 command to configure a RADIUS server on the 

switch. There are two groups of RADIUS configuration parameters. One group of 
parameters is common to all RADIUS server configurations. The second group is 
server specific. You can configure both groups of parameters for all RADIUS 
servers, or you can configure the common and server-specific parameters 
separately. Refer to 

 for a description of the common and 

server-specific RADIUS configuration parameters.

The following example configures the common RADIUS server configuration 
parameters:

SANbox (admin) #> set setup radius common

  A list of attributes with formatting and current values will follow.

  Enter a new value or simply press the ENTER key to accept the current value.

  If you wish to terminate this process before reaching the end of the attributes

  for the server being processed, press 'q' or 'Q' and the ENTER key to do so.

  If you wish to terminate the configuration process completely, press 'qq' or

  'QQ' and the ENTER key to so do.

  PLEASE NOTE:

  -----------

  * SSL must be enabled in order to configure RADIUS User Authentication

    SSL can be enabled using the 'set setup services' command.

  Current Values:

    DeviceAuthOrder  Local

    UserAuthOrder    Local

    TotalServers     1

  New Value (press ENTER to not specify value, 'q' to quit):

    DeviceAuthOrder  1=Local, 2=Radius, 3=RadiusLocal :

    UserAuthOrder    1=Local, 2=Radius, 3=RadiusLocal :

    TotalServers     decimal value, 0-5               :

  Do you want to save and activate this radius setup? (y/n): [n]