Q-Logic 5802V Manuale Utente

2 – Command Line Interface Usage

Logging In to the Switch

2-2

59263-01  A

S

To log in to a switch through Telnet, do the following:

1.

Open a command line window on the workstation and enter the Telnet 
command followed by the switch IP address. The IP address can be one of 
the following:

„

4-byte IP version 4 address

„

16-byte IP version 6 address

„

Domain Name System (DNS) host name (requires a DNS server)

The Telnet window opens prompting you for a login.

# telnet ip_address

2.

Enter an account name and password. The default account name is admin, 
and its password is password.

switch login:admin

password: xxxxxxxx

The following warning appears when you log in for the first time:

Warning:  Your user account password has not been changed

          It is strongly recommended that you do so before

          proceeding

To log off, enter the Exit command:

SANbox #> exit

To log in to a switch through the serial port, do the following:

1.

Configure the workstation port with the following settings:

„

9600 baud

„

8-bit character

„

1 stop bit

„

No parity

2.

Enter an account name and password when prompted. The default account 
name is admin, and its password is password.