Q-Logic 5802V Manuale Utente

4 – Network Configuration

Configuring the Ethernet Port

4-4

59263-01  A

S

The switch supports IP version 6, which includes the following:

„

Network discovery method

„

IP address

„

IP gateway address

The network discovery method determines how the switch acquires its IP address. 
The IP address can come from the IP address (static) that resides on the switch, 
from a DHCP server, or it can be learned from a router through the Neighbor 
Discovery Protocol (NDP). To configure the IP version 6 parameters, enter the 

 Ipv6 command:

SANbox (admin) #> set setup system ipv6

  A list of attributes with formatting and current values will follow.

  Enter a new value or simply press the ENTER key to accept the current value.

  If you wish to terminate this process before reaching the end of the list

  press 'q' or 'Q' and the ENTER key to do so.

  Current Values:

    EthIPv6NetworkEnable    False

    EthIPv6Discovery        Static

    EthIPv6NetworkAddress   <undefined>

    EthIPv6GatewayAddress   <undefined>

  New Value (press ENTER to accept current value, 'q' to quit, 'n' for none):

    EthIPv6NetworkEnable    (True / False)                    :

    EthIPv6Discovery        (1=Static, 2=Dhcpv6, 3=Ndp)       :

    EthIPv6NetworkAddress   (IPv6 Address/Mask Length format) :

    EthIPv6GatewayAddress   (IPv6 Address)                    :

  Do you want to save and activate this system setup? (y/n): [n]