Q-Logic 5802V Manuale Utente

14 – Command Reference

Test Switch

14-198

59263-01  A

S

Tests all ports on the switch using a connectivity test, an offline test, or an online 
test.

Admin session

connectivity [loopback_type]
offline [loopback_type]
online

connectivity [loopback_type]
Performs a connectivity test of the type given by [loopback_type] on all switch 
ports. You must place the switch in the diagnostics state using the 

 command before starting the test. [loopback_type] can be one of 

the following:

Exercises all internal port and inter-port connections.

Exercises all internal port, transceiver, and inter-port connections. A 
transceiver with a loopback plug is required for all ports.

Performs an offline test of the type given by [loopback_type] on all switch ports. 
You must place the switch in the diagnostics state using the 

 

command before starting the test. [loopback_type] can have the following values:

Exercises all internal port connections.

Exercises all port and transceiver connections. A transceiver with a 
loopback plug is required for all ports.

Exercises port-to-device connections for all ports that are online. This test does 
not disrupt communication on the ports.