Q-Logic 5802V Manuale Utente

4 – Network Configuration

Managing IP Security

4-18

59263-01  A

S

To rename a user-defined association (associaton_1), enter the 

Rename command as shown in the following example:

SANbox #> admin start

SANbox (admin) #> ipsec edit

SANbox (admin-ipsec) #> ipsec association rename association_1 association_4

  The security association will be renamed. Please confirm (y/n): [n] y

SANbox (admin-ipsec) #> ipsec save

  The IPsec configuration will be saved and activated.

  Please confirm (y/n): [n] y

You can copy both user-defined and dynamic associations. To copy an 
association (association_1), enter the 

 Copy command as 

shown in the following example:

SANbox #> admin start

SANbox (admin) #> ipsec edit

SANbox (admin-ipsec) #> ipsec association copy association_1 association_a

SANbox (admin-ipsec) #> ipsec save

  The IPsec configuration will be saved and activated.

  Please confirm (y/n): [n] y

Resetting the IP Security configuration deletes all policies and associations from 
the switch. There are two ways to do this. Within an Ipsec Edit session, enter the 

 Clear command, then save the changes as shown in the following example:

SANbox #> admin start

SANbox (admin) #> ipsec edit

SANbox (admin-ipsec) #> ipsec clear

SANbox (admin-ipsec) #> ipsec save

  The IPsec configuration will be saved and activated.

  Please confirm (y/n): [n] y