Q-Logic 5802V Manuale Utente

5 – Switch Configuration

Displaying Switch Information

59263-01  A

5-5

A

The 

 command displays the elapsed time since the switch was last reset 

and the reset method. A hot reset or non-disruptive firmware activation does not 
reset the elapsed time reported by this command. The following example displays 
the time since the last reset.

SANbox #> uptime

  Elapsed up time  : 0 day(s), 2 hour(s), 28 min(s), 44 sec(s)

  Reason last reset: NormalReset

The Show Config command displays a variety of configuration information at the 
port and switch levels. In addition to the basic switch configurations, the Show 
Config command displays parameters that control how data is maintained in the 
security and zoning databases. The Show Config command displays the following 
types of information:

„

„

„

Refer to 

 for information about displaying 

port configuration information.