Q-Logic 5802V Manuale Utente
5 – Switch Configuration
Managing Idle Session Timers
5-30
59263-01 A
S
Displaying Feature Licenses
Enter the
Log command to display the license keys that are installed on
your switch as shown in the following example:
SANbox #> feature log
Mfg Feature Log:
----------------
Switch Licensed for 8 ports
Customer Feature Log:
---------------------
1) day month date 19:39:24 year - Switch Licensed for 24 ports
1-LCVXOWUNOJBE6
Installing a Feature License Key
Enter the
Add command to install a license key on your switch as shown
in the following example:
SANbox #> admin start
SANbox (admin) #> feature add 1-LCVXOWUNOJBE6
License upgrade to 24 ports
Do you want to continue with license upgrade procedure? (y/n): [n] y
Alarm Msg:[day mon date time year][A1005.0030][SM][Upgrading Licensed Ports to 24]
Managing Idle Session Timers
You can limit the duration of idle login sessions and idle Admin sessions (Admin
Start command). You can specify limits up to 1,440 minutes; specifying 0 means
unlimited. Idle login sessions that exceed the limit are logged off
(InactivityTimeout). An idle Admin session that exceeds the limit is ended, but the
login session may be maintained (AdminTimeout). By default, no limit is enforced
on idle login sessions; idle Admin sessions are ended after 30 minutes.
Start command). You can specify limits up to 1,440 minutes; specifying 0 means
unlimited. Idle login sessions that exceed the limit are logged off
(InactivityTimeout). An idle Admin session that exceeds the limit is ended, but the
login session may be maintained (AdminTimeout). By default, no limit is enforced
on idle login sessions; idle Admin sessions are ended after 30 minutes.
Enter the
Admin session configuration as shown in the following example:
SANbox #> show setup system timers
System Information
------------------
AdminTimeout 30
InactivityTimeout 0