Cabletron Systems 6E122-26 Manuale Utente

Screen Lockout Time (Modifiable)

Contains the maximum number of minutes that the Local Management 
application displays a module’s screen while awaiting input or action 
from a user. For example, if the number 5 is entered in this field, the user 
has up to five minutes to respond to each of the specified module’s Local 
Management screens. In this example, after five minutes of “idleness” (no 
input or action), the terminal “beeps” five times, the Local Management 
application terminates the session, and the display returns to the Password 
screen. To enter a new lockout time, refer to 

Chassis Uptime (Read-Only)

Displays the total time the chassis has been operating. The chassis uptime 
is based on which interface module installed in the chassis has been 
operating for the longest period of time.

Operational Mode (Toggle)

This field allows the user to set all the modules in the chassis to operate as 
traditional switches (802.1D SWITCHING option), or as IEEE 802.1Q 
switches (802.1Q SWITCHING option).

In 802.1D SWITCHING mode, the 24 ports located on the front panel, 
and each Fast Ethernet Interface Module, and HSIM port(s) are bridged to 
each other.

When the operational mode is set to 802.1Q SWITCHING, the 6E12X-26 
and 6E13X-25 act as IEEE 802.1Q switches. The modules are able to 
increase their switching functionality by creating and maintaining port 
based Virtual LANs (VLANs).

For details on how to select the Operational Mode, refer to 

.

To set the IP address, perform the following steps:

Use the arrow keys to highlight the IP Address field.

Enter the IP address into this field using Decimal Dotted Notation 
(DDN) format. 

For example: 134.141.79.120