Nikon NP2000 Manuale Utente

15

5. Setting the LAN Setting of Projector

When inserting the wireless LAN card into the PC card slot of the projector, configure the LAN
settings in the “PC Card” page of “LAN Mode” selected from On-Screen Menu.

■ Flow of Setting

Setting of "Network Type".

Select SSID in "Site Survey".

Input "SSID" (if necessary).

Select "Mode" (if necessary).

Select "Channel" (if necessary).

Setting of "WEP"

Select the number of bits of "WEP".

Select "Key Select".

Set "Key 1 to Key 4".

If "Easy Connection" is selected

Step      Display "PC Card" page of "LAN Mode".

Step      Input "IP Address".

Step      Select "Profiles".

Step      Input "Subnet Mask".

Step      Input "Gateway".

Step      Input "DNS Configuration".

Step      Finalize "Advanced".

Step      Reconnect the network.

Step      Finalize the setting.

Step       -       Setting of "Advanced".

Step      Enable or disable "DHCP".

If "Disabled" (without check mark)

If "Enabled" (with check mark)