Panasonic PT-DS8500U Manuale Utente

The automatic setup function can be used to 
automatically adjust the resolution, clock phase and 
picture position when analog RGB signals consisting 
of bitmap images such as computer signals are being 
input, or to automatically adjust the picture position 
when DVI-D/HDMI signals are being input.
It is recommended to supply images with a bright 
white frame at the outermost periphery containing 
characters etc. that are clear in white and black 
contrast when the system is in automatic adjustment 
mode.
Avoid supplying images that involve halftones 
or gradation such as photographs and computer 
graphics.

A message [COMPLETE] appears if adjustment is 

 

z

ended normally.

[CLOCK PHASE] may have been shifted even when the 

 

z

adjustment ended normally. In this case, manually adjust 
the [CLOCK PHASE].
Refer to “CLOCK PHASE” of “POSITION menu” 
(

If an image with blurred edges or a dark image is input, 

 

z

[INCOMPLETE] may appear or adjustment may not 
be performed properly even if [COMPLETE] appears. 
In this case, manually adjust the items of “INPUT 
RESOLUTION” of “ADVANCED MENU” (

For specific signals, adjustment should be made 

 

z

according to “AUTO SETUP” of “DISPLAY OPTION 
menu” (

[AUTO SETUP] may not be available depending on the 

 

z

machine type of the personal computer.
Automatic adjustment may not available for 

 

z

synchronization signal of C-SYNC and G-SYNC.
Image may be distorted for several seconds during 

 

z

automatic adjustment. This is not a malfunction.
For every supplied signal, adjustment is required.

 

z

Automatic adjustment can be canceled by pressing 

 

z

<MENU> button during the course of automatic 
adjustment.
Even for an RGB signal for which automatic setup is 

 

z

possible, if automatic setup is performed while moving 
images are being input, [INCOMPLETE] may appear, 
or adjustment may not be performed properly even if 
[COMPLETE] appears.

[DISABLE], [SUB MEMORY], [SYSTEM SELECTOR], 
[SYSTEM DAYLIGHT VIEW], [FREEZE], [P IN P], 
or [WAVEFORM MONITOR] 

Û

 operations can be 

assigned to <FUNCTION> button on the remote 
control so that it can be used as an easy shortcut 
button.

PT-DZ8700U only

: 

Û

Refer to 

 

z

“FUNCTION BUTTON” of “PROJECTOR SETUP 

The projector has 9 types of internal test patterns to 
check the condition of the set.
To display test patterns, follow the steps below.

Setting is also possible by using an on-screen menu.

 

z

Adjustment of the image, picture quality, position, size 

 

z

and other factors will not be reflected in test patterns. Be 
sure to display an actual input signal before performing 
these adjustments.