Panasonic PT-DW8300U Manuale Utente
ENGLISH -
37
Getting Started
Removing/attaching the projection lens (optional)
How to install the projection
lens
lens
Align the mark (orange) on the
1 )
projection lens with the mark on
the projector ( on the left side of
LOCK), then insert the lens and turn it
clockwise until there is a click.
the projector ( on the left side of
LOCK), then insert the lens and turn it
clockwise until there is a click.
Fix the projection lens with the
2 )
attached “Lens fixing screw”.
Û
Tighten the screw into the first screw hole
z
on the right side of the mark (orange) of the
projection lens with a Phillips-head screwdriver.
projection lens with a Phillips-head screwdriver.
(There is not the projection lens fixing tap hole
on all the lenses.)
on all the lenses.)
How to remove the projection
lens
lens
Remove the “Lens fixing screw”.
1 )
Û
Remove the first screw on the right side of the
z
mark (orange) of the projection lens with a
Phillips-head screwdriver.
Phillips-head screwdriver.
While holding down the “LOCK
2 )
button”, turn the projection lens
counterclockwise, and then pull it off.
counterclockwise, and then pull it off.
Turn the projection lens counterclockwise until
z
its mark (orange) is aligned with the mark on
the projector ( on the left side of LOCK).
the projector ( on the left side of LOCK).
Some types of the lens do not have the projection lens fixing screw hole.
:
Û
Attention
Do not touch the lens signal receiver. Dust or dirt may cause defective contact.
z
Do not touch the surface of the projection lens with your bare hands.
z
Store the replaced lens where it will be free from vibration and impact.
z
Turn the projection lens counter clockwise to confirm that it does not come out.
z
LOCK button