IBM 260 Manuale Utente

RS/6000 43P 7043 Models 150 and 260 Handbook

devices located on an ATM network or bridged to a token ring, Ethernet, or 
other LAN.

The TURBOWAYS 155 PCI MMF ATM Adapter is compatible with:

  • IBM 8285 ATM Workgroup Switch

  • IBM 8260 ATM Subsystem

  • IBM 8282 ATM Concentrator

  • IBM 8281 ATM LAN Bridge

A maximum of four high-speed networking adapters are supported per 
system in any combination. This limitation includes the following adapters:

  • TURBOWAYS 155 PCI MMF ATM Adapter (# 2988)

  • SysKonnect SK-NET FDDI-LP SAS PCI for PowerPC Systems (# 2741)

  • SysKonnect SK-NET FDDI-LP DAS PCI for PowerPC Systems (# 2742)

  • SysKonnect SK-NET FDDI-UP SAS PCI for PowerPC Systems (# 2743

5.1.5.3  PCI TURBOWAYS 25 ATM Adapter (# 2998)
The TURBOWAYS 25 ATM PCI Adapter is for direct access to ATM networks. 
This adapter provides dedicated 25 Mbps full-duplex connection using PVCs 
or SVCs and enables TCP/IP to run over an ATM network. The TURBOWAYS 
25 ATM PCI Adapter also supports communication with devices located on an 
ATM network or bridged to a token ring, Ethernet, or other LAN.

TURBOWAYS 25 ATM PCI Adapter is compatible with:

  • IBM 8285 ATM Workgroup Switch

  • IBM 8260 ATM Subsystem

  • IBM 8282 ATM Concentrator

Systems ordered with AIX preinstalled will have the device drivers installed 
on the hard disk drive

AIX drivers are shipped on diskette with the hardware feature. Systems 
ordered with AIX preinstalled will have the device drivers installed on the 
hard disk drive.