Apple WS 7250/120 Manuale Utente

 

 Troubleshooting

Symptom Charts/System - 10

 

2) Disconnect hard drive SCSI cable and power cable.

3) Remove hard drive from chassis.

4) Turn drive over and examine part number label on 50-pin 

SCSI connector (removing drive carrier if necessary). If 

label reads “1280S p/n TM12S012” 

 

  “REV 02-B”, 

replace drive.

 

: Only Revision “02” drives cause this problem; there-

fore, make sure bar code label includes the words “REV 02-

B” before replacing hard drive.