Toshiba ProT1!0 Manuale Utente

 
6. Model Select : 

[1]Dyn–Jpn : BIOS Logo is “dynabook” , CMOS Language is Japanese . 
[2]Tos-Jpn :  BIOS Logo is “Toshiba” ,    CMOS Language is Japanese . 
[3]Tos-Eng : BIOS Logo is “Toshiba” ,    CMOS Language is English . 
[4]Tos-FR :   BIOS Logo is “Toshiba” ,    CMOS Language is French . 

 
7. UUID : 
    Total is 16 byte data , Front 10 byte is time random data , last 6 byte is LAN MAC . 
 
8. Brightness Table : 
    It depend on LCD EDID to set different brightness data . 
 
a. SLP2.0 Build Sig : 

[1]Non OS : EEPROM fill 

”MS” for non Microsoft OS , BIOS not load SLP OPROM function . 

[2]OS : EEPROM fill 

Others for Microsoft OS , BIOS load SLP OPROM function .

 

 
b. Wireless LAN ID : 
    If change M/B , but wireless/B not change , need fill wireless MAC into new change M/B . 
 
c. AC Adapter Select : 
    [1]65W : Machine need 65W AC Adapter . 

[2]75W : Machine need 75W AC Adapter . 
[3]90W : Machine need 90W AC Adapter . 
[4]120W : Machine need 120W AC Adapter . 
 
The AC Adapter request is base on machine power request , some high performance need 
120W Adapter , low cost machine maybe only 75W can meet request . 
Because AC Adapter do not had HWID for detect , so need key in data by menu . 
 
(1) If machine setting 75W , AC Adapter use 120W , it’s OK . 
(2) If machine setting 120W , AC Adapter use 75W , because Adapter can’t support 

enough power , it can’t charge well .  

(3) If machine setting 90W , AC adapter use 90W , Adapter Select 90 W , it’s OK . 
(4) If machine setting 90W , AC adapter use 90W , Adapter Select 120W , “PHM” and 

“ECO” utility will display wrong data , power consumption display double data more 
the machine actual use .