Garmin DTC300 Manuale Utente
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
5-30
Using the Resin Heat (K) option
Use this option to control the amount of heat the Printer uses when printing with the resin
black panel(s) of a full-color Ribbon or when printing with a resin-only Ribbon by adjusting
the Resin Heat slide.
black panel(s) of a full-color Ribbon or when printing with a resin-only Ribbon by adjusting
the Resin Heat slide.
Step Procedure
1
Move the slide to the left to cause less heat to be used in the printing process,
causing resin images to be lighter or less saturated.
causing resin images to be lighter or less saturated.
OR
Move the slide to the right to (a) cause more heat to be used or (b) cause the
resin image to be darker or more saturated.
(Note: This control can be helpful for fine-tuning the transfer of resin text and
bar codes.)
resin image to be darker or more saturated.
(Note: This control can be helpful for fine-tuning the transfer of resin text and
bar codes.)