Garmin DTC300 Manuale Utente

Pagina di 278
RESTRICTED USE ONLY 
Fargo Electronics, Inc. 
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 
14-2
Glossary of Terms (continued) 
Term Definition 
Barcodes 
A series of alternating black and white stripes, of varying widths 
(each character denoted by a set number and width of black 
stripes) that allows characters to be optically read by a computer.  
Batch print 
A file sent down from the computer that contains commands to print 
a number of cards, sequentially.  
Battery Back-up 
A power supply that can keep AC electronic equipment running for 
a short time when power is interrupted, allowing enough time for the 
user to save data and close the machine properly. 
Bi-directional 
A communication standard that allows two way data transfer 
between PC and Printer.  
BIOS (Basic 
Input/Output System) 
The part of the operating system in a computer that handles 
communication between the PC mainboard and its peripherals. 
Typically residing in chip-based, non-volatile memory.  
Bit 
An abbreviation for binary digital. Each bit is an element of 
information that can have two states: off and on. 
Bit map 
A graphic produced by an array of pixel elements with the color 
hue, brightness and saturation information stored in bits. The more 
bits, the more values and thus the greater variety. 1 bit color is 
black and white, 8-bit color produces 256 shades of gray and 24-bit 
color can produce 16.7 million colors. 
Board 
A term used for the circuit board, a hard mylar plate made of many 
layers, that holds the electronic circuit elements and wire traces. 
Boot-up 
A series of operations that the Printer runs through when power is 
first applied including a series of initializing, status testing and a 
diagnostics program to ensure a ready state. 
Buffer 
A block of memory, in the Printer or PC, that holds print files until 
the processor is ready to print them. 
Cable 
A set of conductors wrapped together and often concealed within 
insulation, used for signal transfer from one device to another, with 
connectors on either end that allows the cable to be removed. 
Continued on the next page