Epson FX-1180 Manuale Utente
Error Indicators
Check the printer’s control panel lights and follow the appropriate instructions below. For more
information, see, Chapter 7 of your User’s Guide.
information, see, Chapter 7 of your User’s Guide.
Pause
Paper Out
Beep pattern
n
n
l l l
Cause
Solution
No paper is loaded in the selected paper
source.
source.
Load paper in the selected paper source, or select a
different paper source with the paper release lever. When
the Paper Out light goes off, press the Pause button to turn
off the Pause light.
different paper source with the paper release lever. When
the Paper Out light goes off, press the Pause button to turn
off the Pause light.
The paper is not loaded correctly.
Remove the paper and reload it correctly.
Pause
Beep pattern
n
l l l l l
Cause
Solution
The paper release lever is set to the
wrong position.
wrong position.
Load paper in the selected paper source, then set the paper
release lever to the position for that paper path. If paper
from another paper source is loaded in the printer, press
the Load/Eject button to eject the paper; then move the
paper release lever to the desired position.
release lever to the position for that paper path. If paper
from another paper source is loaded in the printer, press
the Load/Eject button to eject the paper; then move the
paper release lever to the desired position.
Pause
Paper Out
Beep pattern
n
f
l l l
Cause
Solution
A single sheet of paper is not fully
ejected.
ejected.
Press the Load/Eject button to eject the sheet.
Continuous paper does not feed to the
standby position.
standby position.
Tear off the printed page at the perforation; then press the
Load/Eject button. The paper feeds to the standby
position.
Load/Eject button. The paper feeds to the standby
position.
Paper is jammed in the printer.
To clear a paper jam, see “Clearing Paper Jams” earlier in
this guide.
this guide.
Pause
Paper Out
n
f
Cause
Solution
The print head is overheated.
Wait a few minutes until the printer cools down; the printer
resumes printing automatically once the print head cools.
resumes printing automatically once the print head cools.
Font
Tear Off/Bin
Pause Paper Out
f
f
f
f
Cause
Solution
An unknown printer error has occurred.
Turn off the printer and leave it off for several minutes;
then turn it on again. If the error recurs, contact your dealer.
then turn it on again. If the error recurs, contact your dealer.
Light Status
Beep pattern
n = On
l l l
short series of beeps (three times)
f = Flashing
l l l l l
long series of beeps (five times)
The Pause and Paper Out lights are on, and you
hear the short series of beeps.
hear the short series of beeps.
The Pause light is on and the Paper Out light is
flashing.
flashing.
The Pause light is on, the Paper Out light is
flashing, and you hear the short series of beeps.
flashing, and you hear the short series of beeps.
The Pause light is on and you hear the long
series of beeps.
series of beeps.
All the lights are flashing.