Xerox 100 Manuale Utente

Pagina di 160
 Installation Planning Guide
A-1
A.
Supplies
This appendix provides information and specifications for media 
used with your Xerox DocuPrint 100/115/135/155/180 EPS 
printer. Instructions for ordering supplies are also provided.
Consumable supplies (those that are depleted during operation 
of the system), such as paper, dry ink, developer, fuser agent, 
etc., must be ordered for your printer. It is important that an 
adequate supply of these items be on hand for installation, and 
that your supply be maintained afterwards.
Paper and other throughput stocks
The success of any print run is greatly dependent on the proper 
selection, care, and handling of the stock used. 
Selecting paper
Select your paper carefully. If you do not use the proper paper, 
you increase the probability of paper jams and misfeeds. The 
stocks you use must meet the specifications set forth by Xerox 
for operability in the printer. For additional information about 
paper specifications, refer to Helpful Facts about Paper
delivered with your printer.
Acceptable paper
stocks and sizes
The printer accepts the following standard size cut-sheet papers:
7 by 10 inches / 178 by 254 mm (with 7-inch kit option)
B5:  7.17 by 10.12 inches / 182 by 257 mm (with 7-inch 
option)
US Letter:  8.5 by 11 inches / 216 by 279 mm
US Legal:  8.5 by 14 inches / 216 by 356 mm
A4:  8.27 by 11.69 inches / 210 by 297 mm
B4 (European):  9.84 by 13.89 inches / 250 by 353 mm
JIS B4 (Japanese):  10.12 by 14.33 inches / 257 by 364 mm