Xerox -07W & -11W Manuale Utente
2-4
Getting Started
Note: The options in this dialog box are described in the Serial
Settings section in the Setup Menus chapter and only apply
when the connection type is set to Serial.
when the connection type is set to Serial.
The status bar along the bottom of the TeemTalk window displays two LEDs. The first
LED indicates whether or not you are connected to the host. It will show red when
not connected and green when you are connected. The second LED indicates
whether or not data is being sent to or from the host. It will show dull green when
there is no activity, red when data is being sent to the host, and bright green when
data is being received from the host.
LED indicates whether or not you are connected to the host. It will show red when
not connected and green when you are connected. The second LED indicates
whether or not data is being sent to or from the host. It will show dull green when
there is no activity, red when data is being sent to the host, and bright green when
data is being received from the host.
Making A Network Host Connection
To connect to a network host, select the protocol required in the Type list box:
TeemTalk for Windows 95 and NT:
TCP/IP
CTERM
WinSock 2
NetBIOS
MultiLan
ISDN
LAT
Microsoft SNA
TeemTalk-OSI (option)
TeemTalk for Windows 3.1x:
LAT
NetBIOS
B and W. TCP
INFOConnect
FTP PC/TCP
OSLAN
WinSock
ISDN
Sun PC/NFS
TELAPI
Ext. NCSI
DOSLANTI
LAN W/Place
BAPI
Eicon X25
MultiLan
NetManage
Interrupt 14
IPX/SPX
PathWay
INT6B / NASI
NetWare for LAT
CTERM
LanManager
TeemTalk-OSI
Note: Refer to the Network Connection chapter in the Networking
Guide for a description of each protocol supported and for
any additional configuration required prior to making a
connection.
any additional configuration required prior to making a
connection.