Canon MP530 Manuale Utente

Chapter 7

Changing the Machine Settings

„

Selects the amount of image that extends off the paper when printing in Borderless (full).

„

If the Auto Sheet Feeder or Cassette runs out of paper, the paper source automatically switches 
to the other one.

Before changing any settings, you can print the USER’S DATA LIST to check the current settings of 
your machine. For details, see 

.

„

z

Selects <FAX/TEL AUTO SW> receive mode.

z

Selects <FAX ONLY MODE> receive mode.

z

Selects <DRPD> receive mode. This setting is only available in US and Canada.

z

Selects <NETWORK SWITCH> receive mode. This setting is not available in some 
countries and regions.

z

Be sure to revert this setting to <OFF> after printing since it may result in lower print quality.

If you set <LARGE> for this function, the area of the image extending off the paper becomes 
larger.

z

This function only works when both paper sources are loaded with paper of the same size 
and type.

z

When printing from a computer, you need to set this feature with the printer driver. For 
details, refer to the Printer Driver Guide.

z

When printing from a computer, this feature can be used only when both paper sources are 
loaded with paper other than Credit Card- or Legal-sized paper.

z

In Copy mode, this feature can be used only when both paper sources are loaded with 
paper other than Credit Card- or Legal-sized paper.

z

In Fax mode, this feature can be used only when both paper sources are loaded with A4- 
or Letter-sized plain paper.

For the limit number of paper to load into the Auto Sheet Feeder and Cassette, see the table 
in