Pitney Bowes DM1100 Manuale Utente

If you have a barcode scanner attached to your mailing system, you can 
configure it to scan:

•

account names, 

•

account codes (Business Manager only), 

•

speed codes (INVIEW™, Budget Manager only),

•

Custom and Normal Presets,

•

Job IDs, or

•

ZIP Codes

if you are in the INVIEW™, Budget Manager or Business Manager 
accounting systems. 

Refer to the appropriate topic in this section:

•

If you are using an accounting system on your mailing system you can 
set the default scan type so that your system recognizes your particular 
accounting application when it scans the barcode. Refer to Setting the 
Default Scan Type. 

•

If you are attempting to scan barcodes that were defined for other 
accounting systems and those accounts contain a prefix, you can set 
up your system to recognize that prefix when it scans in the barcode. 
Refer to Adding Barcode Prefixes. 

•

If you need to combine multiple barcode scans into a single barcode, 
refer to Combining Barcodes.

•

If you want your system to require an operator to press the Enter key to 
accept each barcode value after it is scanned and displayed on the 
IntelliLink® Control Center screen, refer to Setting Auto-Enter. 

NOTE:  You can use a barcode scanner to scan in barcodes for USPS Special 
Services regardless of the accounting system you are using. USPS Special Ser-
vices do not require any set up operations here.