Toshiba 431B Manuale Utente

4300 Series Ancillary Cabinets Installation and Operation Manual

2) The voltage of the input power source must be within the rated input voltage range. The 

input frequency range must be within the rated input frequency range.

3) The 

ancillary cabinet

 should not be used with a load that has a rated input that is greater 

than the rated output of the UPS.

4)  If using the 

ancillary cabinet

 to provide power to motors that require high starting current 

or with motors that require a long starting time, call Toshiba support for guidance in over 

sizing the UPS for locked-rotor current.

5) DO NOT insert metal objects or combustible materials in the ventilation slots of the 

ancillary cabinet

.

6) DO NOT place, hang, or paste any objects on the exterior surfaces of the 

ancillary cabinet

.

7) DO NOT attempt to disassemble, modify, or repair the 

ancillary cabinet

. Call your Toshiba 

sales representative for repair information.

8) Turn the power on only after installing 

ALL of the covers.

9) DO NOT remove any covers of the 

ancillary cabinet

 when power is on.

10) If the 

ancillary cabinet

 should emit smoke or an unusual odor or sound, turn the power 

off immediately.

11)  Additional  warnings  and  notifications  shall  be  posted  at  the  equipment  installation

location as deemed required by 

Qualified Personnel.