Sony VPH-V20M Manuale Utente
Video Projector
VPH-V20M
INPUT A:
Analogue RGB/Component:
BNC
R/R-Y:
0.7 Vp-p ±2 dB, positive, 75
Ω
G:
0.7 Vp-p ±2 dB, positive, 75
Ω
G with Sync/Y:
1.0 Vp-p ±2 dB, sync negative, 75
Ω
B/B-Y:
0.7 Vp-p ±2 dB, positive, 75
Ω
SYNC/HD:
Composite sync: 0.6~8.0 Vp-p,
high impedance negative
Horizontal sync: 0.6~8.0 Vp-p,
high impedance negative
VD:
Vertical sync:
0.6~8.0 Vp-p,
high impedance negative
high impedance negative
CONTROL S:
Loop-through Stereo Mini Jack
Safety Regulations
EN60 065 (TÜV), CE, C-Tick, PTB
Accessories
Supplied accessories:
Remote commander RM-PJV20
AA size Batteries (
×
2) for remote commander
AC power cord
Spacer for 508 cm (200-inch ) front projection
Spacer (0.2 mm) for 254 cm (70 to 100-inch)
rear projcetion
rear projcetion
Spacer (0.8 mm) for 254 cm (70 to 100-inch)
rear projection
rear projection
Operating manual
Installation manual
Optional accessories:
Siganl Interface Cable
SIC-10
Interface Unit
IFU-1271M
Suspension Support
PSS-722
PSS-10
PSS-10
Remote Control Receiver
RM-PJ10
80-inch flat screen
VPS-80FH
100-inch flat screen
VPS-100FH
120-inch flat screen
VPS-120FH
70-inch rear screen
VPS-702R
© 1998 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measures are approximate.
Sony and Betacam are trademarks of Sony Corporation.
All other trademarks are the property of their respective owners.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measures are approximate.
Sony and Betacam are trademarks of Sony Corporation.
All other trademarks are the property of their respective owners.
Optical
Projection system:
3 picture tubes, 3 lenses, direct projection system
CRT:
7-inch (Phosphor size: 5.5-inch) liquid cooled high
brightness monochrome tubes
brightness monochrome tubes
Projection lens:
High performance hybrid multi-coated lens F1.0/130 mm
Screen:
70-inch (177.8 cm) to 250-inch (635 cm) measured
diagonally (Factory preset: 100-inch (254 cm))
diagonally (Factory preset: 100-inch (254 cm))
Light output:
ANSI 100 lm (15 kHz: 60 Hz, 6500 K)
Peak white: 700 lm
Peak white: 700 lm
All white: 140 lm
Throwing distance:
100-inch (254 cm):
3301 mm (Approx. 11 ft)
200-inch (508 cm):
6417 mm (Approx. 21 ft)
Signals
Color system:
NTSC, PAL, SECAM, NTSC
4.43
automatically selected
Resolution:
700 TV lines (Composite video input)
1000 TV lines (RGB input)
1000 TV lines (RGB input)
Test signals:
Cross hair
General
Power requirements:
220 V AC to 240 V AC, 50/60 Hz
Power consumption:
210 W
Operating temperature:
0 to 40 ºC (14 to 104 ºF)
Operating humidity:
35 to 85 %
Storage temperature:
-20 to 60 ºC (-4 to 140 ºF)
Storage humidity:
10 to 90 %
Dimensions:
532 (W)
×
288 (H)
×
597 (D) mm
(21
×
11
3
/
8
×
23
5
/
8
inches)
Mass:
Approx. 30 kg (66 lb 2 oz)
Heat dispersion:
716.6 BTU
Inputs/Outputs
VIDEO IN:
Video*:
BNC
1.0 Vp-p ±2 dB, sync negative, 75
Ω
S video*:
Mini DIN 4-pin
Y (luminance):
1.0 Vp-p ±2 dB, sync negative, 75
Ω
C (chrominance): Burst 0.286 Vp-p ±2 dB (NTSC), 75
Ω
or 0.3 Vp-p ±2 dB (PAL), 75
Ω
VIDEO OUT:
Video:
BNC
1.0 Vp-p ±2 dB, 75
Ω
*S video has priority over the video input.
Distributed by
MK7168/1OHB(8/98)
Printed in Japan
©1998 Sony Corporation
VPH-V20M Specifications
Connector
Control Panel