Canon SX6000 Manuale Utente
Setting Display Status
100
Select HDMI Over Scan
[HDMI over scan]
You can select this as required when you
project visual software using an HDMI sig-
nal.
project visual software using an HDMI sig-
nal.
MENU > [Display settings] > [HDMI over scan]
MENU > [Input settings] > [HDMI over scan]
Press the
OK button to accept your setting
and then press the
MENU button or EXIT
button (WX6000 / SX6000).
• The factory defaults settings are [On]
when [HDMI In] (
) is set for [Auto]
and [Off] when it is set for [Computer].
HDMI
Component
Digital PC
Analog PC
Off
The entire input signal (100%) is pro-
jected. The images projected may be
smaller than the full projection screen.
jected. The images projected may be
smaller than the full projection screen.
On
Images are projected with distortion
at the peripheral section of images
trimmed off. (The central 95% of the
images are projected.)
Part of the peripheral sections of
images may be cut out depending on
the resolution of the signal. In such a
case, select [Off].
at the peripheral section of images
trimmed off. (The central 95% of the
images are projected.)
Part of the peripheral sections of
images may be cut out depending on
the resolution of the signal. In such a
case, select [Off].