Lantronix 2100 Manuale Utente

UBox User Guide 

47 

Serial number of the UBox to which you want to connect. 

Name of the UBox to which you want to connect. 

Status of the UBox to which you want to connect. Online 
displays if you have successfully connected to the UBox. 
Offline displays if the UBox is not detected. 

Displays Yes or No depending on whether a password was 
specified on the Edit Local Server Access window. 

Displays Yes or No depending on whether Active Discovery 
was enabled on the Edit Local Server Access window. 

4.  To edit the settings, select the UBox and click the Edit button. The Edit Local 

Server Access window opens. Repeat step 3. 

5.  To remove the UBox from the list, select it and click the Remove button (to the 

right of the Server Access Settings area). 

When you connect to a USB device that is password protected, you are asked if you 
want to save your password. If you save a password for a USB device, it displays in 
the Device Passwords area of the Local Settings tab. 

1. In 

the 

Device Passwords area, verify the following (if you have saved a 

password previously): 

Name that is programmed into your USB device by its 
manufacturer. This name may different from the actual name 
and model number of your device. For example, if you have 
an HP Deskjet 882 printer, it may appear as HP Deskjet 880 
or HP Printer. Some USB devices do not have any names 
programmed into them. For unnamed USB devices, the USB 
device's programmed Vendor ID (VID) and Product ID (PID) 
display. 

Status of the USB device: Attached or Detached to indicate 
whether the device is connected to or disconnected from the 
UBox.  

Serial number on the label on the bottom of the UBox to which 
the USB device is connected.  

Port number on the UBox to which the USB device is 
connected. 

Serial number of the USB device, if programmed into it by the 
vendor. 

2.  To remove a locally saved password, select the USB device and click the 

Remove button to the right of the Device Passwords area.