Extreme networks 4700 Manuale Utente
Altitude 4700 Series Access Point Installation Guide
35
CAUTION
Only a qualified installation professional should set or restore the access point’s radio and power
management configuration in the event of a password reset.
management configuration in the event of a password reset.
Configuring “Basic” Device Settings
Configure a set of minimum required device settings within the Quick Setup screen. The
values (LAN, WAN etc.) can often be defined in other locations within the menu tree.
When you change the settings in the Quick Setup screen, the values also change within
the screen where these parameters also exist. Additionally, if the values are updated in
these other screens, the values initially set within the Quick Setup screen will be
updated.
values (LAN, WAN etc.) can often be defined in other locations within the menu tree.
When you change the settings in the Quick Setup screen, the values also change within
the screen where these parameters also exist. Additionally, if the values are updated in
these other screens, the values initially set within the Quick Setup screen will be
updated.
To define a basic access point configuration:
1
Select System Configuration -> Quick Setup from the menu tree, if the Quick Setup
screen is not already displayed.
screen is not already displayed.
2
Select the System Configuration tab to define the access point’s system, WIPS server
and radio configuration.
and radio configuration.