Sinar 552.36.095 Dépliant

Sinarback eMotion / CMV Interface

552.36.095

Figure 1: Sinarback eMotion/CMV Interface

Figure 2: Mounting and connecting the Sinarback eMotion/CMV Interface

Application

With the Sinarback eMotion/CMV Inter-
face 552.36.095 (fig. 1) any

Sinarback

eMotion can be operated on a Sinar p3
or Sinar f3 SL with sliding adapter

and

Sinaron Digital CMV lenses.

Mounting

The Sinarback eMotion/CMV Interface is
mounted

on the rear side of a Sinar

Sliding Adapter 100 (see fig. 2) of any
Sinar p3 or Sinar f3 SL view camera by
means of a Velcro strip that is part of the
delivery.

Connections

• The two cables

Trigger and

Winder are plugged in the Sinarback
eMotion.

• To power the Sinaron Digital CMV

lenses a Sinar

12 volt power supply

(e.g. 523.11.053) is required and is
plugged in the interface's DC IN 12 V
socket

. Furthermore, the cable of

the sliding adapter must be plugged in
the interface's socket

• To enable the CMV lenses to open

and close in dependence of the position
of the sliding adapter (viewer or cap-
ture) an additional

Sinarback Auto

Cable Release 551.43.059 is required.
Usually, this cable is included with
every "Sinar Sliding Adapter 100 HB-V"
(except with the "Basic" versions). How-
ever, it is also available separately. This
cable is screwed in the appropriate
thread on the lower side of the sliding
adapter; its "telephone" plug is plugged
in the interface's CTRL socket

• The flash synch cable is connected to

the X-contact of the CMV lens.

Operation

• To operate the Sinarback eMotion/

CMV Interface, the Sinarback eMotion
must be updated to

firmware ver-

sion 4.42 or higher, and Sinar

CaptureShop™ 5.4.2 or higher
must be used.

• When the Sliding Adapter is moved to

the

Viewer position, the shutter of the

Sinaron Digital CMV lens automatically
opens to the preset working aperture.
When the Sliding Adapter is moved
to the

Capture position, the shutter

of the CMV lens is being closed.

•

Exposure times from 1/60 to 30
seconds are to be set in the Settings
Menu on the Sinarback eMotion.

• An Image is

captured either remote

controlled from the Sinar Capture-
Shop™ or at the camera by means of
the Auto Cable Release 551.43.059

Deutsch siehe Rückseite

_________________________________________________________________________________________________________________________

SINAR AG
CH-8245 Feuerthalen/Switzerland
Telephone

+41 / 52 647 07 07

Fax

+41 / 52 647 06 06

E-mail marketing@sinarcameras.com
Website www.sinarcameras.com

_inCaInterfaceEmotionCMV_0210416V2.doc

Printed in Switzerland

Technical modifications reserved

1051.08/07.11.000.05 de - 02.10416