Adaptec 29320A Manuale Utente
9
2
Connect the other end of the cable to a SCSI connector on the
back of an external device. If you are installing only one
external device, terminate the device and skip to Step 4.
back of an external device. If you are installing only one
external device, terminate the device and skip to Step 4.
3
Connect the other external SCSI devices by linking each device
to the previous one, as shown below. Terminate only the device
at the end of the chain.
to the previous one, as shown below. Terminate only the device
at the end of the chain.
4
Connect power cables to all external device(s) and to the
computer.
computer.
4
4
SCSI terminator
ASC-29320A IG.fm Page 9 Tuesday, July 29, 2003 3:30 PM