Lucent Technologies 7820-0766-004 Manuale Utente

Configuring a 20 Series CellPipe
Configuring WAN interface

4-2

CellPipe™ 20 Series User’s Guide

When you power up the unit, it is set to default (factory settings) and the console will 
display the following message:

Starting to download from remote server... 

This means TURN-UP is enabled and is downloading the latest configuration 
information. 

To disable the feature, interrupt the download and manually configure the system. 

To re-enable the feature, you need to select the 

default

 command and reinstall the 

factory default configuration.

Currently the 20 Series units support SDSL and ADSL WAN interfaces. 

The following is a list of the menus available under the 

sdsl

 command:

auto - <Enable>|<Fast>|<Scan>|<Disable> autobaud rate function

cell - <Enable>|<Disable> idle-cell header

dbit - configure the SDSL data bit as normal or reverse polarity

default - set SDSL configuration back to factory setting

enable - activate the last updated SDSL parameters

maxrate - configure the SDSL autobuad max rate

rate - manually configure the SDSL line rate

scramble - <Enable>|<Disable> payload scrambling

smbit - configure sign/magnitude bit sequence

status - display the configuration and status of current SDSL 

setting

terminal - configure modem to COE or CPE mode

Select the 

auto

 command to set values for autobaud rate function.

 

>sdsl> auto <Enable>|<Fast>|<Scan>|<Disable>

(Scan Rate: 2320, 1744, 1536, 1152, 768, 384, 192)