Lucent Technologies 7820-0766-004 Manuale Utente

CellPipe™ 20 Series User’s Guide

4-9

Select the 

dhcpserver 

command to configure the range of IP addresses that are 

associated with the subnet mask used for the DHCP server. 

>lan> dhcpserver <range1 startIP> <range1 endIP> [<range2 

Select the 

setdhcp

 command to set the DHCP mode of the unit. 

>lan> setdhcp <server|client|disable>

Select the 

setip

 command to set the the IP address and subnet mask for the link. 

>lan> setip <etherip[/<masknum>] [subnet mask]>|<dhcp>

Select the 

show

 command to display the LAN configuration. For example:

>lan> show 

Ethernet ip: 149.198.65.46

Subnet mask: 255.255.255.0

FullDuplex:Enable

DHCP current setting : disable.

DHCP ineffective setting : disable.

The 

manage

 command allows you to set the user password. When user enables a 

password, the unit will time out after 10 minutes if there is no activity. The password 
has to be re-entered to resume activity.

>manage> setpass

Password disabled

New Password:<password>

The 

mode

 command allows you to select for either the bridging or the routing mode 

of operation.