Iomega Network Device Manuale Utente
DataSafe NAS User’s Manual
24
To set or change the workgroup membership
of the DataSafe NAS
1. On the primary menu bar, click
Network Setup
.
2. On the Network Setup page, click
Identification
.
The Server Appliance Identity page (Figure 5) dis-
plays.
plays.
Figure 5
Server Appliance Identity
3. Select the
Workgroup
radio button and enter
the name of the workgroup to join.
4. If the DataSafe NAS belonged to a domain before
you joined the workgroup, the DataSafe NAS will
be disjoined from the domain and the computer
account will be disabled.
be disjoined from the domain and the computer
account will be disabled.
5. Click
OK
.
6. You will be asked to reboot the DataSafe NAS. You
may accept the reboot, or cancel it.
n
If you click
OK
, the DataSafe NAS will reboot and
a page will appear indicating that the unit is
restarting. After the DataSafe NAS is back online,
you must reinitiate your browser, then return to
restarting. After the DataSafe NAS is back online,
you must reinitiate your browser, then return to