Iomega Network Device Manuale Utente

DataSafe NAS User’s Manual 

27

Each computer on the network must have a unique IP 
address to send and receive data. You can use the 

screen to have your 

DataSafe NAS automatically obtain the IP address 
configuration from the Dynamic Host Configuration 
Protocol (DHCP) server. You can also configure the 
address(es) manually. 
In addition, you can use the 

 screen to specify one or more 

gateway addresses. (A gateway address is the 
address of a local IP router on the same network as 
the DataSafe NAS that is used to forward traffic to 
destinations beyond the local network.) The value in 
each field must be a number from 0 through 255.

Changing the IP address may cause the client 
to lose its connection with the DataSafe NAS. 
To reconnect, the user must either use the new 
IP address or wait until the DNS server is 
updated.

1. On the primary menu bar, click 

. 

2. On the Network Setup page, click 

. 

3. On the 

 table, select the 

network connection to modify. 

4. On the 

 list, select 

. 

The IP Address Configuration page (Figure 7) dis-
plays.