ZyXEL Communications P-630-S Manuale Utente
P-630-S Series Quick Start Guide
17
7 In the Network screen, select
Ethernet Adaptor (en x) in
the Show field. Click the
PPPoE tab and select the
Connect using PPPoE check
box. Type the information
from your ISP in the Service
Provider, Account Name,
Password and PPPoE
Service Name fields. Select
the Show PPPoE status in
menu bar check box. Click
Apply Now.
the Show field. Click the
PPPoE tab and select the
Connect using PPPoE check
box. Type the information
from your ISP in the Service
Provider, Account Name,
Password and PPPoE
Service Name fields. Select
the Show PPPoE status in
menu bar check box. Click
Apply Now.
8 Click the PPPoE status menu bar icon at the
right corner and select Connect.
2.2 Setting up Your Computer’s IP Address
Note: This section shows you how to configure an IP address on
your computer. You only need to do this if you were given an
IP address by your ISP.
IP address by your ISP.
2.2.1 Windows
Screens for Windows XP are shown in this guide unless otherwise specified.
Steps and screen shots may vary depending on the version of Windows.
Steps and screen shots may vary depending on the version of Windows.
1 Click Start, Control Panel and Network Connections.