Adaptec 39106 Manuale Utente
17
Configuring the Adaptec SCSI Card 39160 with SCSISelect
SCSI Device Configuration:
Sync Transfer Rate (MBytes/sec)
160, 80.0, 53.4, 40.0,
32.0, 26.8, 20.0,
16.0, 13.4, 10.0,
ASYN
32.0, 26.8, 20.0,
16.0, 13.4, 10.0,
ASYN
160
Initiate Wide Negotiation
Yes, No
Yes (Enabled)
Enable Disconnection
Yes, No
Yes (Enabled)
Send Start Unit Command
Yes, No
Yes (Enabled)
Enable Write Back Cache
2
Yes, No,
N/C (No Change)
N/C (No Change)
N/C (No
Change)
Change)
BIOS Multiple LUN Support
Yes, No
No (Disabled)
Include in BIOS Scan
Yes, No
Yes (Enabled)
Advanced Configuration Options:
Reset SCSI Bus at IC Initialization
Enabled, Disabled Enabled
Display <Ctrl> <A> Messages during
BIOS Initialization
BIOS Initialization
[Auto-sync]
Enabled, Disabled Enabled
Extended BIOS Translation for
DOS Drives > 1 GByte
DOS Drives > 1 GByte
Enabled, Disabled Enabled
Verbose/Silent Mode [Auto-sync]
Verbose, Silent
Verbose
Host Adapter BIOS [Auto-sync]
Enabled
Disabled: Scan
Disabled: Scan
Bus
Disabled: Not Scan
Enabled
Domain Validation
[Auto-sync]
Enabled, Disabled Enabled
Support Removable Disks Under BIOS
as Fixed Disks
as Fixed Disks
Disabled,
Boot Only,
All Disks
Boot Only,
All Disks
Disabled
BIOS Support for Bootable CD-ROM
Enabled,
Disabled Enabled
BIOS Support for Int 13 Extensions
Enabled,
Disabled Enabled
1
Setting is valid only if Multiple LUN Support is enabled.
2
Settings are valid only if host adapter BIOS is enabled.
SCSI
Select Options
Available Settings
Default Setting