Edimax Technology EU-4230 Manuale Utente
5
*Actual strings depend on your operation system. These screen
shots are from Windows Vista and might vary slightly for each
operation system.
shots are from Windows Vista and might vary slightly for each
operation system.
Now the installation is complete. You can connect the adapter to a
network device by an Ethernet cable:
network device by an Ethernet cable:
1. Connect an Ethernet cable to the Ethernet port on the
adapter.
2. Connect the other end of the Ethernet cable to your
network hub, switch or router.
The Link LED should light up green to indicate a proper physical
connection between the adapter and the network. If the Link LED
doesn’t light up, please verify the cable connections between all the
network devices.
connection between the adapter and the network. If the Link LED
doesn’t light up, please verify the cable connections between all the
network devices.