Wayne-Dalton WDUSB-10 Manuale Utente

35

 

You can temporarily establish 

a specific poll rate in 

Thinkessentials

®

 using seconds 

as the unit.   one second is the 

minimum poll rate.  Please be 

aware that polling too frequently 

in a Z-Wave

®

 network can cause 

negative performance behavior 

for the network by not allowing 

enough time for each module 

to report back to the controller. 

Before you begin, you must exit 

Thinkessentials

®

.  See page 

37 for instructions on “exiting 

Thinkessentials

®

.”

1.  Please see your computer 

operating System documentation 

for information on how to start 

the command line option.  In the 

Windows XP example shown, the 

command line option is started 

by clicking on START and then 

clicking on RUN.  This will open a 

RUN dialog box.

2.  In the RUN dialog box type in 

CMD and click on ok to open the 

Command line window.

3.  Navigate to the drive and 

directory where Thinkessentials

®

 

is located.

4.  Type the program name, 

“Thinkessentials” followed by 

the poll command as noted in the 

following example:

Thinkessentials /poll=500

Note in the example 500 is the 

maximum number of seconds 

between polling requests.

5.  Press the eNTeR key and 

Thinkessentials

®

 will start.

Type in the /poll command line 
option with your desired value.

Change to drive and directory where 
Thinkessentials

®

 is located.

Initiate command line function.