Toshiba e-STUDIO20 Manuale Utente
3-5
1
2
3
4
5
6
7
9
10
11
12
8
Bypass Copying
Bypass copying is convenient in the following instances:
• When the size of the paper you require is not installed in the copier’s paper cassettes.
• When you want to use a special type of paper such as OHP film.
* The optional stack feed bypass is required for any of the above.
• When the size of the paper you require is not installed in the copier’s paper cassettes.
• When you want to use a special type of paper such as OHP film.
* The optional stack feed bypass is required for any of the above.
1
Place the original(s) on the original feed tray or on
the glass.
(Setting Original
Page 2-4)
2
Select desired copy mode.
4
Place sheets of copy paper on the stack feed bypass.
The following message appears:
3
Align the slide of the stack feed bypass to the width
of the paper to be loaded.
Set paper size of bypass
• Place the sheets on the bypass guide and align the slides
to the paper size.
• For type of paper that can be used in bypass copying:
Page 1-7
• Extend the paper holder when the size of paper is large.