Nortel Networks AN/DC Manuale Utente

Installing and Operating AN/DC and ANH-8/DC Systems

B-4

312410-A Rev 00

3

Enter IP address in dotted 

decimal notation:

Enter the IP address for the COM 
interface.

Enter the subnetwork mask in 

dotted decimal notation:

Enter the subnetwork mask for the 
COM interface IP address.

Is the router connected to

the same local area network

as the Site Manager 

workstation? 

(y/n) [n]:

y(es)
n(o)

Press the Return 
key.

Enter routing protocol

number [1]:

1. RIP
2. OSPF
3. Static Route to Site Manager

(Complete the 
worksheet for the 
protocol you 
select.)

Enter wide area protocol

number [1]:

1. Nortel Networks Point-to-Point 

Protocol (Proprietary)

2. Frame Relay
3. Point-to-Point Protocol (PPP) 

Standard 

4. Switched Multimegabit Data 

Service (SMDS)

(Complete the 
worksheet for the 
protocol you 
select.)

Do you wish to set

SNMP community management? 

(y/n) [n]:

y(es)
n(o)

Setting up SNMP community 
management is optional.

4

TFTP default volume [1]:

The script automatically assigns 
the TFTP default volume to “1.”

None

5

Do you want to enable 

TELNET? (y/n) [n]:

y(es)
n(o)

Enabling TELNET is optional.

6

FTP default volume [1]:

The script automatically assigns 
the FTP default volume to “1.”

7

Do you wish to save this 

configuration to a file? 

(y/n) [y]

y(es)
n(o)

Press the Return 
key.

Enter filename [

startup.cfg]:

We recommend using the default 
filename.

Press the Return 
key.

 (continued)