Nortel Networks AN/DC Manuale Utente

Using Local Boot (the Quick-Start Procedure)

312410-A Rev 00

B-13

 

After you enter 

, the AN/DC or ANH-8/DC progresses through the 

Quick-Start script as follows:

1. The script begins prompting you for the initial Global Worksheet information.

2. After you select a router protocol option, the script prompts for specific 

protocol information.

3. After finishing the router protocol configuration, the script requests a wide 

area protocol selection.

4. After you select a wide area protocol, the script prompts for specific protocol 

information.

5. After finishing the wide area protocol configuration, the script prompts for the 

rest of the Global Worksheet information. 

When the configuration is complete, the router runs through a test procedure for 
the IP interface. When the test is complete, the following prompt appears:

Enter IP address of Site Manager workstation:

Obtain this information from your network administrator.