Cisco Systems 6400 Manuale Utente

2-8

Cisco Video Surveillance 6400 IP Camera Installation Guide

OL-28494-01

Chapter 2 Camera Installation

Connecting a Waterproof Ethernet Cable

To connect the 6400 IP camera to an Ethernet cable with a waterproof connection, perform the following
steps.

Procedure

Step 1

Disassemble the components of the waterproof connector into its individual components as shown
below.

Step 2

Strip about 1/2 inch (12 mm) of the sheath off the end of an Ethernet cable.

Step 3

Insert the housing (D) into the screw nut (C).

Step 4

Insert the seal (B) into the housing (D).

Step 5

Insert the stripped Ethernet cable through the sealing nut (A) and the housing (D).

Step 6

Clamp the cable with an RJ45 plug.

Sealing Nut (A)

Seal (B)

Screw Nut (C)

Housing (D)

Gasket (E)

1/2 in. (12 mm)

(D)

(C)

(B)

(A)