Cisco Systems 6400 Manuale Utente

You also can also perform these reset operations from the Maintenance Settings window as described in 
the Cisco Video Surveillance 6000 Series IP Camera Configuration Guide.

After you install and set up the Cisco Video Surveillance IP Camera, you can connect to the IP camera 
through Internet Explorer and access the Camera Video & Control window to view live video.

The Camera Video & Control window also provides for controlling the video display, configuring preset 
positions, and controlling certain IP camera functions. Available controls depend on the privilege level 
of the user. 

To view live video, log in to the IP camera, then click View Video in the IP camera Main window menu 
bar. The Camera Video & Control window appears. This window displays live video from the camera 
and lets you control a variety of camera and display functions.

The controls that you see in the Camera Video & Control window depend on your IP camera privilege 
level and the configurations settings for the IP camera. Users with the Administrator privilege can access 
all controls. Users with the Viewer privilege do not have access to the following controls:

Video image controls

Motion detection controls

 describes the controls in the Camera Video & Control window.

 

 Reboot.

Press and immediately release 
the Reset button.

This action is equivalent to 
powering the IP camera down 
and then powering it up. Settings 
that are configured for the IP 
camera are retained.

Factory reset.

Press and hold the button for at 
least 15 seconds.

Sets all IP camera options to 
their default values. After you 
perform this procedure, follow 
the steps in the 

.

Video Codec 
drop-down list

Choose the codec for video transmission (H.264 or MJPEG).

You can choose H.264 only if the primary video stream (channel 1) is enabled. 
You can choose MJPEG only if the secondary video stream (channel 2) is 
enabled.